TDS 130FA is currently the smallest and most popular motor – one stator and one rotor do a great job. Equipped with a suitable gear, the drive can be used in mobile working machines, small construction machines, agricultural robots or automated guided vehicle systems.
TDS 130FA is available in voltages from 24 V – making it ideal for low voltage applications – and in different rated speeds.
The 130s motors convince with their high power density, low moment of inertia for rapid acceleration and a smooth running even at low speeds.
Optional gears enable the perfect adjustment of the motors to the given conditions.
All motors are suitable as a generator and support recuperation. They have an integrated encoder and temperature sensor. Optionally, the motors are available with a holding brake and a suitable motor controller.
By the way: we produce the stator cores for our axial flux motors on our own winding and punching machines.
|
Motor data |
|
|
Voltage |
24 – 320 VDC |
|
Traction power |
1,7 – 2,7 kW |
|
Rated speed |
3.000 – 6.000 rpm |
|
Maximum speed |
up to 6.300 rpm |
|
Rated torque |
3,1 – 5,7 Nm |
|
Maximum torque (2 min) |
8,1 – 13,5 Nm |
|
Weight |
~ 6,9 kg |
|
Outer diameter |
194 mm |
|
Model |
AC permanent magnetic excited synchronous motor (Axial magnetic flux motor design) |
|
Operating mode |
S1 (continuous operation) |
|
Cooling |
Air-cooled; forced cooling with min. 5 m/s |
|
Magnets |
NdFeB – neidymium iron boron |
|
Model flange |
IM B14 (customizable on request) |
|
IP protection class |
IP 54, higher protection classes possible |
|
Thermal class |
Insulation class (155 °C) – IEC 60034 |
|
Dielectric strength |
In accordance to IEC EN 60034 |
|
Ambient conditions |
Operation temperature range (-10 °C to +40 °C), transport (-20 °C bis +60 °C) |
|
Motor protection (temperature sensor) |
KTY 84 – 130 series |
|
Connections |
standard with cable ~ 1m; optionally plug |
|
Motor Feedback (depending on controller) |
8-Bit Encoder with sin/cos output Resolver Re15 (1P pole pair)OPTIONAL |
|
Motor shaft |
Tooth shaft in accordance wo. DIN 5480 or more |
And yours?
