back to overview

TDS 192FA

Traction drive for low voltage applications

Due to their great performance, the 192s motors are a popular drive for tracked vehicles and wheel hub drives. On the rail, the motors convince with high performance and small dimensions. Optional gears enable the perfect adjustment of the motors to the given conditions. All motors are suitable as a generator and support recuperation. They have an integrated encoder and temperature sensor. Optionally, the motors are available with a holding brake and a suitable motor controller. By the way: we produce the stator cores for our axial flux motors on our own winding and punching machines.

Product advice

Due to their great performance, the 192s motors are a popular drive for tracked vehicles and wheel hub drives. On the rail, the motors convince with high performance and small dimensions.
Optional gears enable the perfect adjustment of the motors to the given conditions.
All motors are suitable as a generator and support recuperation. They have an integrated encoder and temperature sensor. Optionally, the motors are available with a holding brake and a suitable motor controller.

By the way: we produce the stator cores for our axial flux motors on our own winding and punching machines.

Motor data
Voltage	72 – 560 VDC
Traction power	8,3 – 15,0 kW
Rated speed	3.000 - 5500 rpm
Maximum speed	up to 6.000 rpm
Rated torque	22,5 – 27,3 Nm
Maximum torque (2 min)	71 – 82 Nm
Weight	~ 28,2 kg
Outer diameter	282 mm
Model	AC permanent magnetic excited synchronous motor (Axial magnetic flux motor design)
Operating mode	S1 (continuous operation)
Cooling	Air-cooled; forced cooling with min. 6 m/s
Magnets	NdFeB – neidymium iron boron
Model flange	IM B14 (customizable on request)
IP protection class	IP 54, higher protection classes possible
Thermal class	Insulation class (155 °C) – IEC 60034
Dielectric strength	In accordance to IEC EN 60034
Ambient conditions	Operation temperature range (-10 °C to +40 °C), transport (-20 °C bis +60 °C)
Motor protection (temperature sensor)	KTY 84 – 130 series
Connections	standard with cable ~ 1m; optionally plug
Motor feedback (depending on controller)	8-Bit Encoder with sin/cos output Resolver Re15 (1P pole pair)^OPTIONAL
Motor shaft	Tooth shaft in accordance wo. DIN 5480 or more

Motor brake
Controller

Agriculture/municipal
Working machines
Logistic
Firefighting
Automotive
Avionics
Fans

And yours?

More products

TDS 130FA Traction drive for low voltage applications

TDS 192W Water-cooled traction drive for low voltage applications

TDS 150FA Traction drive for low voltage applications