TDS 150FA is only slightly larger but performs about ¼ more than the TDS 130FA. The drive is used in many applications, e. g. as wheel drive or as an efficient alternative for conventional motors.
TDS 150FA is ideal for low voltage applications but also available in higher voltages covering the demands for mobile and stationary use optimally.
The motor consists of one stator and one rotor, which ensure a light weight and a low moment of inertia.
Optional gears enable the perfect adjustment of the motors to the given conditions.
All motors are suitable as a generator and support recuperation. They have an integrated encoder and temperature sensor. Optionally, the motors are available with a holding brake and a suitable motor controller.
By the way: we produce the stator cores for our axial flux motors on our own winding and punching machines.
|
Motor data |
|
|
Voltage |
26 – 320 VDC |
|
Traction power |
2,5 – 3,6 kW |
|
Rated speed |
3.000 - 5500 rpm |
|
Maximum speed |
up to 6.000 rpm |
|
Rated torque |
6 – 8 Nm |
|
Maximum torque (2 min) |
13 – 15 Nm |
|
Weight |
~ 10,2 kg |
|
Outer diamter |
218 mm |
|
Model |
AC permanent magnetic excited synchronous motor (Axial magnetic flux motor design) |
|
Operating mode |
S1 (continuous operation) |
|
Cooling |
Air-cooled; forced cooling with min. 5 m/s |
|
Magnets |
NdFeB – neidymium iron boron |
|
Model flange |
IM B14 (customizable on request) |
|
IP protection class |
IP 54, higher protection classes possible |
|
Thermal class |
Insulation class (155 °C) – IEC 60034 |
|
Dielectric strength |
In accordance to IEC EN 60034 |
|
Ambient conditions |
Operation temperature range (-10 °C to +40 °C), transport (-20 °C bis +60 °C) |
|
Motor protection (temperature sensor) |
KTY 84 – 130 series |
|
Connections |
standard with cable ~ 1m; optionally plug |
|
Motor feedback (depending on controller) |
8-Bit Encoder with sin/cos output |
|
Motor shaft |
Tooth shaft in accordance wo. DIN 5480 or more |
And yours?
