In the water-cooled version, TDS 192 is almost unstoppable. Water cooling increases the performance and significantly extends duty cycle. TDS 192W provides reliable service for powerful and enduring applications.
The maintenance free, TDS 192W motors are ideal for low voltage applications but also show their full potential at higher voltages.
Optional gears enable the perfect adjustment of the motors to the given conditions.
All motors are suitable as a generator and support recuperation. They have an integrated encoder and temperature sensor. Optionally, the motors are available with a holding brake and a suitable motor controller.
By the way: we produce the stator cores for our axial flux motors on our own winding and punching machines.
|
Motor data |
|
|
Voltage |
72 – 560 VDC |
|
Traction power |
12 – 19 kW |
|
Rated speed |
3.000 - 5500 rpm |
|
Maximum speed |
up to 6.000 rpm |
|
Rated torque |
31,8 – 42,4 Nm |
|
Maximum torque (2 min) |
70 – 82 Nm |
|
Weight |
~ 33,5 kg |
|
Outer diameter |
284 mm |
|
Model |
AC permanent magnetic excited synchonuous motor (Axial magnetic flux motor design) |
|
Operating mode |
S1 (continuous operation) |
|
Cooling |
Water-cooled; min. 8 L/min |
|
Magnets |
NdFeB – neidymium iron boron |
|
Model flange |
IM B14 (customizable on request) |
|
IP protection class |
IP 54, higher protection classes possible |
|
Thermal class |
Insulation class (155 °C) – IEC 60034 |
|
Dielectric strength |
In accordance to IEC EN 60034 |
|
Ambient conditions |
Operation temperature range (-10 °C to +40 °C), transport (-20 °C bis +60 °C) |
|
Motor protection (temperature sensor) |
KTY 84 – 130 series |
|
Connections |
standard with cable –~ 1m; optionally plug |
|
Motor feedback (depending on controller) |
8-Bit Encoder with sin/cos output |
|
Motor shaft |
Tooth shaft in accordance wo. DIN 5480 or more |
And yours?
